Configuring Lacp; Figure 3-23. Lag Membership Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
The LAG Membership Page contains parameters for defining LAG and LACP ports.
Command Attributes
• LAG Port — Displays the LAG number.
• Name — Displays the user-defined port name.
• Link State — Displays the link operational status.
• Member — Displays the ports configured to the LAG.
• Remove — Removes the LAG. The possible field values:
• Checked — Removes the selected LAG.
• Unchecked — Maintains the LAGs.
Web – Click System, Interfaces, Interface, LAG Membership. Define the fields and
click Apply.
CLI – The following is an example of the CLI commands for aggregating ports:
Console(config-if)# channel-group 1 mode on

Configuring LACP

Aggregate ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed, set to full-duplex operations.
LAG ports can contain different media types if the ports are operating at the same
speed. Aggregated links can be set up manually or automatically established by
enabling Link Aggregation Control Protocol (LACP) on the relevant links. Aggregate
ports can be linked into link-aggregation port-groups. Each group is comprised of
72

Figure 3-23. LAG Membership Page

4-467