3
Configuring the Switch
• Software Version — Displays the installed software version number.
• Boot Version — Displays the current boot version running on the device.
Web – Click System, System Management, System Information. Specify the system
name, location, and contact information for the system administrator, then click
Apply.
Figure 3-5. System Information Page
CLI – The following is an example of the CLI System Information commands:
console# show system
4-629
Managing Stacking
Stacking provides multiple switch management through a single point as if all stack
members are a single unit. All stack members are accessed through a single IP
address through which the stack is managed. The stack is managed from the
following:
• Web-based interface
• SNMP Management Station
• Command Line Interface (CLI)
Devices support stacking up to six units per stack, or can operate as stand-alone
units.
During the Stacking setup, one switch is selected as the Stacking Master and
another stacking member can be selected as the Secondary Master. All other
devices are selected as stack members, and assigned a unique Unit ID.
36