Police Aggregate; Wrr-Queue Cos-Map - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

police aggregate

The police aggregate Policy-map Class Configuration mode command applies an
aggregate policer to multiple classes within the same policy map. To remove an
existing aggregate policer from a policy map, use the no form of this command.
Syntax
police aggregate aggregate-policer-name
no police aggregate aggregate-policer-name
Parameters
• aggregate-policer-name — Specifies the name of the aggregate policer.
Default Setting
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
Command Usage
An aggregate policer can be applied to multiple classes in the same policy
map; An aggregate policer cannot be applied across multiple policy maps or
interfaces.
To return to the Policy-map Configuration mode, use the exit command. To
return to the Privileged EXEC mode, use the end command.
Example
The following example applies the aggregate policer called policer1 to a class called
class1 in policy map called policy1.
Console(config)# policy-map policy1
Console(config-pmap)# class class1
Console(config-pmap-c)# police aggregate policer1
Related Commands
police
qos aggregate-policer
show qos aggregate-policer

wrr-queue cos-map

The wrr-queue cos-map Global Configuration mode command maps Class of
Service (CoS) values to a specific egress queue. To return to the default
configuration, use the no form of this command.
Syntax
wrr-queue cos-map queue-id cos1...cos8
no wrr-queue cos-map [queue-id]
492