Crypto Certificate Request - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
• state — Specifies the state or province name. (Range: 1 - 64)
• country — Specifies the country name. (Range: 2 - 2)
• days — Specifies number of days certification is valid. (Range: 30 - 3650)
Default Setting
The Certificate and SSL's RSA key pairs do not exist.
If no certificate number is specified, the default certificate number is 1.
If no RSA key length is specified, the default length is 1024.
If no URL or IP address is specified, the default common name is the lowest
IP address of the device at the time that the certificate is generated.
If the number of days is not specified, the default period of time that the
certification is valid is 365 days.
Command Mode
Global Configuration mode
Command Usage
The command is not saved in the device configuration; however, the certificate
and keys generated by this command are saved in the private configuration
(which is never displayed to the user or backed up to another device).
Use this command to generate a self-signed certificate for the device.
If the RSA keys do not exist, parameter key-generate must be used.
Example
The following example regenerates an HTTPS certificate.
Console(config)# crypto certificate 1 generate key-generate
Related Commands

crypto certificate request

crypto certificate import
ip https certificate
show crypto certificate mycertificate
crypto certificate request
The crypto certificate request Privileged EXEC mode command generates and
displays certificate requests for HTTPS.
Syntax
crypto certificate number request [cn common-name] [ou organization-unit]
[or organization] [loc location] [st state] [cu country]
Parameters
• number — Specifies the certificate number. (Range: 1 - 2)
708