Switchport General Allowed Vlan - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Example
The following example configures VLAN number 123 as the native VLAN when
Ethernet port 1/e16 is in trunk mode.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport trunk native vlan 123
Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan

switchport general allowed vlan

switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport general allowed vlan
The switchport general allowed vlan Interface Configuration mode command
adds or removes VLANs from a general port.
Syntax
switchport general allowed vlan add vlan-list [tagged | untagged]
switchport general allowed vlan remove vlan-list
Parameters
• add vlan-list — Specifies the list of VLAN IDs to be added. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen
designates a range of IDs.
• tagged — Indicates that the port transmits tagged packets for the VLANs.
• untagged — Indicates that the port transmits untagged packets for the
VLANs.
Default Setting
If the port is added to a VLAN without specifying tagged or untagged, the
default setting is tagged.
684