Port Storm-Control Broadcast Rate - Alcatel OS-LS-6224 User Manual

Command Mode
Interface Configuration (Ethernet) mode
Command Usage
Use the port storm-control broadcast rate Interface Configuration (Ethernet)
mode command, to set the maximum allowable broadcast rate.
Example
The following example enables broadcast storm control on port 1/g1 of a device.
Console(config)# interface ethernet 1/g1
Console(config)# port storm-control broadcast enable
Related Commands
port storm-control broadcast enable

port storm-control broadcast rate

show ports storm-control
port storm-control broadcast rate
The port storm-control broadcast rate Interface Configuration (Ethernet) mode
command configures the maximum broadcast rate. To return to the default
configuration, use the no form of this command.
Syntax
port storm-control broadcast rate rate
no port storm-control broadcast rate
Parameters
• rate — Maximum kilobits per second of broadcast and multicast traffic on a
port.
Default Setting
The default value is 3500 Kbits/Sec.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
Use the port storm-control broadcast enable Interface Configuration mode
command to enable broadcast storm control.
Example
The following example configures the maximum storm control broadcast rate at 900
Kbits/Sec on Ethernet
port 1/e5 of a device.
Console(config)# interface ethernet 1/e5
Console(config-if)# port storm-control broadcast rate 900
Ethernet Configuration Commands
4
399