Viewing Memory Logs - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
console# config
console(config)# logging on
console(config)# logging console errors
console(config)# logging buffered debugging
console(config)# logging file alert
console(nconfig)# exit
console# clear logging file
Clear Logging File [y/n]y

Viewing Memory Logs

The system allows you to enable or disable event logging, and specify which levels
are logged to the RAM (Cache).
Severe error messages that are logged to the RAM are permanently stored in the
switch to assist in troubleshooting network problems. When a severity level is
selected, all severity level choices above the selection are selected automatically.
The Memory Page allows you to configure and limit system messages that are
logged to the RAM.
Command Attributes
• Log Index — Displays the log number.
• Log Time — Displays the time at which the log was generated.
• Severity — The following are the available log severity levels:
• Emergency — The highest warning level. If the device is down or not functioning
properly, an emergency log message is saved to the specified logging location.
• Alert — The second highest warning level. An alert log is saved, if there is a
serious device malfunction; for example, all device features are down.
• Critical — The third highest warning level. A critical log is saved if a critical
device malfunction occurs; for example, two device ports are not functioning,
while the rest of the device ports remain functional.
• Error — A device error has occurred, for example, if a single port is offline.
• Warning — The lowest level of a device warning. The device is functioning, but
an operational problem has occurred.
• Notice — Provides device information.
• Informational — Provides device information.
• Debug — Provides debugging messages.
• Description — Displays the log message text.
Web – Click System, System Management, Logs, Memory.
44
4-667
4-602
4-604
4-605
4-605
4-668
4-606