History; History Size - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Command Usage
To specify no timeout, enter the exec-timeout 0 command.
Example
The following example configures the interval that the system waits until user input is
detected to 20 minutes.
Console(config)# line console
Console(config-line)# exec-timeout 20
Related Commands
show line

history

The history Line Configuration mode command enables the command history
function. To disable the command history function, use the no form of this command.
Syntax
history
no history
Default Setting
The command history function is enabled.
Command Mode
Line Configuration mode
Command Usage
This command enables the command history function for a specified line. To
enable or disable the command history function for the current terminal
session, use the terminal history user EXEC mode command.
Example
The following example enables the command history function for telnet.
Console(config)# line telnet
Console(config-line)# history
Related Commands

history size

show history
show line
history size
The history size Line Configuration mode command configures the command
history buffer size for a particular line. To reset the command history buffer size to
the default configuration, use the no form of this command.
446