Alcatel OS-LS-6224 User Manual page 744

Console (config-vlan)# vlan 100
Console (config-vlan)# exit
4. Configure port e5 as a customer port for VLAN 100:
Console (config)# interface ethernet e5
Console (config-if)# switchport mode customer
Console (config-if)# switchport customer vlan 100
Console (config-if)# exit
Console (config)#
5. Configure port e10 as a trunked port, tagged for VLAN 100.
Console (config)# interface ethernet e10
Console (config-if)# switchport mode trunk
Console (config-if)# switchport trunk allowed vlan add 100
Console (config-if)# exit
Console (config)#
The following is an example of the QinQ show commands
console# show interfaces switchport ethernet 1/e5
Port: 1/e5
Port Mode: Customer
Gvrp Status: disabled
Ingress Filtering: true
Acceptable Frame Type: admitAll
Ingress UnTagged VLAN ( NATIVE ): 100
Protected: Disabled
Port is member in:
Vlan
---- -----------------------
100
Forbidden VLANS:
Vlan
---- -----------------------
Classification rules:
Protocol based VLANs:
Group ID
-------- ------------------
Mac based VLANs:
-720
Name
100
Name
Vlan ID
Egress rule Port Membership Type
----------- --------------------
Untagged Static