Ip Arp Inspection List Assign; Ip Arp Inspection Logging Interval - Alcatel OS-LS-6224 User Manual

Example
The following example displays static ARP binding.
Console(config)# ip arp inspection list servers
Console(config-ARP-list)# ip 172.16.1.1 mac 0060.704C.7321
Console(config-ARP-list)# ip 172.16.1.2 mac 0060.704C.7322

ip arp inspection list assign

The ip arp inspection list assign Global Configuration mode command assigns
static ARP binding lists to a VLAN. To delete the assignment, use the no form of this
command.
Syntax
ip arp inspection list assign vlan name
no ip arp inspection list assign vlan
Parameters
• vlan — Specifies the VLAN name.
• name — Specifies the list name.
Default Configuration
No static ARP binding list assignment exists.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example assigns static ARP binding list arplist to VLAN vlan1.
Console # (config)# ip arp inspection list assign arplist vlan1
Console # (config)#

ip arp inspection logging interval

The ip arp inspection logging interval Global Configuration mode command
configures the minimal interval between successive ARP SYSLOG messages. To
return to the default configuration, use the no form of this command.
Syntax
ip arp inspection logging interval {seconds | infinite}
no ip arp inspection logging interval
Parameters
• seconds — Specifies the minimal interval between successive ARP
SYSLOG messages. A 0 value means that a system message is
immediately generated. (Range: 0-86400)
DHCP Snooping, IP Source Guard and ARP Inspection Commands
4
661