Configuration And Image File Commands; Copy - Alcatel OS-LS-6224 User Manual

Configuration and Image File Commands

Command Function

copy

Copies files from a source to a destination.
delete Deletes a file from a flash memory device.
dir Displays the list of files on a flash file system
more Displays a file.
rename Renames the file.
boot system Specifies the system image that the device loads at startup.
show running-config Displays the contents of the currently running configuration file.
show startup-config Displays the contents of the startup configuration file.
show startup-config Displays the active system image file that is loaded by the device
at startup.
copy
The copy Privileged EXEC mode command copies files from a source to a
destination.
Syntax
copy source-url destination-url
Parameters
• source-url — The source file location URL or reserved keyword of the
source file to be copied. (Range: 1-160 characters)
• destination-url — The destination file URL or reserved keyword of the
destination file. (Range: 1-160 characters)
The following table displays keywords and URL prefixes:
Keyword
flash:
running-config
startup-config
image
boot
tftp://
xmodem:
Table 4-12. Configuration and Image File Commands
Source or Destination
Source or destination URL for flash memory. It's the default in case
a URL is specified without a prefix.
Represents the current running configuration file.
Represents the startup configuration file.
If the source file, represents the active image file. If the destination
file, represents the non-active image file.
Boot file.
Source or destination URL for a TFTP network server. The syntax
for this alias is tftp://host/[directory]/filename. The host can be
represented by its IP address or hostname.
Source for the file from a serial connection that uses the Xmodem
protocol.
Configuration and Image File Commands
4
Mode Page
PE 4-369
PE 4-372
PE 4-373
PE 4-374
PE 4-375
PE 4-376
PE 4-376
PE 4-377
PE 4-378
369