Show Ip Source-Guard Status - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Syntax
show ip source-guard inactive [mac-address mac-address] [ip-address
ip-address] [vlan vlan] [ethernet interface | port-channel
port-channel-number]
Default Configuration
This command has no default configuration.
Command Mode
EXEC mode
Command Usage
Since the IP source guard uses the Ternary Content Addressable Memory
(TCAM) resources, there may be situations where IP source guard addresses
are inactive because of lack of TCAM resources.
By default, every minute the software conducts a search for available space in
the TCAM for the inactive IP source guard addresses.
The ip source-guard tcam retries-freq Global Configuration mode command
changes the frequency or disables automatic retries for TCAM space.
The ip source-guard tcam locate Privileged EXEC mode command retries
locating TCAM resources for the inactive IP source guard addresses.
This command displays the inactive IP source guard addresses.
Example
The following example displays the IP source guard inactive addresses.
Console# show ip source-guard inactive
TCAM resources search frequency: 10 minutes
Interface Filter IP Address MAC Address
---------- ------ ---------- -------------- ---------- ---------- ----------
1/32 IP

show ip source-guard status

The show ip source-guard status EXEC mode command displays the IP source
guard status.
Syntax
show ip source-guard status [mac-address mac-address] [ip-address
ip-address] [vlan vlan] [ethernet interface | port-channel
port-channel-number]
656
10.1.8.32 0060.704C.83FF 3
VLAN Type
3DHCP
Reason
Resource
Problem