3
Configuring the Switch
CLI – The following is an example of the CLI commands used for configuring Access
Profiles:
Console(config)# ip https port 100
Console(config)# ip http port 100
Defining Profile Rules
Access profiles can contain up to 256 rules that determine which users can manage
the switch module, and by which methods. Users can also be blocked from
accessing the device. Rules are composed of filters including:
• Rule Priority
• Interface
• Management Method
• IP Address
• Prefix Length
• Forwarding Action
The rule order in the profile rules table is important, since packets are matched to
the first rule meeting the rule criteria. The Profiles Rules Page contains parameters
for defining profile rules.
Command Attributes
• Access Profile Name — Displays the access profile to which the rule is attached.
• Priority — Defines the rule priority. When the packet is matched to a rule, user
groups are either granted permission or denied device management access. The
106
Figure 3-44. Access Profiles Page
4-706
4-704