Show Copper-Ports Tdr; Show Copper-Ports Cable-Length - Alcatel OS-LS-6224 User Manual

show copper-ports tdr

The show copper-ports tdr User EXEC mode command displays information on
the last Time Domain Reflectometry (TDR) test performed on copper ports.
Syntax
show copper-ports tdr [interface]
Parameters
• interface — A valid Ethernet port. (Full syntax: unit/port)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The maximum length of the cable for the TDR test is 120 meter.
Example
The following example displays information on the last TDR test performed on all
copper ports.
Console> show copper-ports tdr
Port Result
---- ------
1/e1 OK
1/e2 Short
1/e3 Test has not been performed
1/e4 Open
1/e5 Fiber
Related Commands
test copper-port tdr

show copper-ports cable-length

show copper-ports cable-length
The show copper-ports cable-length User EXEC mode command displays the
estimated copper cable length attached to a port.
Syntax
show copper-ports cable-length [interface]
Length [meters]
---------------
50
64
-
PHY Diagnostics Commands
Date
--------------------------------
13:32:00 23 July 2005
13:32:00 23 July 2005
-
4
463