Dot1X Timeout Supp-Timeout - Alcatel OS-LS-6224 User Manual

(EAP)-request/identity frame (assuming that no response is received) to the client,
before restarting the authentication process. To return to the default configuration,
use the no form of this command.
Syntax
dot1x max-req count
no dot1x max-req
Parameters
• count — Number of times that the device sends an EAP-request/identity
frame before restarting the authentication process. (Range: 1-10)
Default Configuration
The default number of times is 2.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
The default value of this command should be changed only to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients. and authentication servers.
Example
The following example sets the number of times that the device sends an
EAP-request/identity frame to 6 .
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x max-req 6
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period
dot1x timeout tx-period

dot1x timeout supp-timeout

dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x timeout supp-timeout
The dot1x timeout supp-timeout Interface Configuration mode command sets the
time for the retransmission of an Extensible Authentication Protocol (EAP)-request
802.1x Commands
277
4