4
Command Line Interface
Command Usage
There are no user guidelines for this command.
Example
The following example configures the PVID for Ethernet port 1/e16, when the
interface is in general mode.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general pvid 234
Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan
switchport trunk native vlan
switchport general allowed vlan
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport general ingress-filtering disable
The switchport general ingress-filtering disable Interface Configuration mode
command disables port ingress filtering. To return to the default configuration, use
the no form of this command.
Syntax
switchport general ingress-filtering disable
no switchport general ingress-filtering disable
Default Setting
Ingress filtering is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
686