4
Command Line Interface
boot system
The boot system Privileged EXEC mode command specifies the system image that
the device loads at startup.
Syntax
boot system [unit unit] {image-1 | image-2}
Parameters
• unit — Specifies the unit number.
• image-1 — Specifies image 1 as the system startup image.
• image-2 — Specifies image 2 as the system startup image.
Default Setting
If the unit number is unspecified, the default setting is the master unit number.
Command Mode
Privileged EXEC mode
Command Usage
Use the show bootvar command to find out which image is the active image.
Example
The following example loads system image 1 at device startup.
Console# boot system image-1
Related Commands
show bootvar
show running-config
The show running-config Privileged EXEC mode command displays the contents
of the currently running configuration file.
Syntax
show running-config
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
376