Sntp Unicast Client Poll - Alcatel OS-LS-6224 User Manual

Example
The following example enables the device to use the Simple Network Time Protocol
(SNTP) to request and accept SNTP traffic from servers.
Console(config)# sntp unicast client enable
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key
sntp client poll timer
sntp broadcast client enable
sntp anycast client enable

sntp unicast client poll

sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling
for the Simple Network Time Protocol (SNTP) predefined unicast servers. To disable
the polling for SNTP client, use the no form of this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
Default Setting
Polling is disabled.
Command Mode
Global Configuration mode
Command Usage
Polling time is determined by the sntp client poll timer Global Configuration
mode command.
Example
The following example enables polling for Simple Network Time Protocol (SNTP)
predefined unicast clients.
Console(config)# sntp unicast client poll
Related Commands
sntp authentication-key
sntp authenticate
4
Clock Commands
363