Command Usage
A user and notification view are not automatically created. Use the
snmp-server user, snmp-server group and snmp-server view Global
Configuration mode commands to generate a user, group and notify group,
respectively.
Example
The following example configures an SNMPv3 host.
Console(config)# snmp-server v3-host 192.168.0.20 john noauth
Related Commands
show snmp
snmp-server trap authentication
The snmp-server trap authentication Global Configuration mode command
enables the device to send SNMP traps when authentication fails. To disable SNMP
failed authentication traps, use the no form of this command.
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Default Setting
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
Console(config)# snmp-server trap authentication
Related Commands
show snmp
snmp-server contact
The snmp-server contact Global Configuration mode command configures the
system contact (sysContact) string. To remove system contact information, use the
no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
4
SNMP Commands
541