Loopback Detection Commands
Command
Function
loopback-detection
Enables loopback detection globally.
enable
loopback-detection
Enables loopback detection on an interface.
enable
loopback-detection
Configures the loopback detection mode.
mode
loopback-detection
Sets the interval between loopback detection packets.
interval
show
Displays information about loopback detection.
loopback-detection
loopback-detection enable
The loopback-detection enable Global Configuration mode command enables the
Loopback Detection feature globally. Use the no form of this command to disable
the Loopback Detection feature.
Syntax
loopback-detection enable
no loopback-detection enable
Default Setting
Loopback detection is disabled.
Command Mode
Global Configuration mode
Command Usage
Use this command to enable or disable the Loopback Detection feature
globally. Use the loopback-detection enable Interface Configuration mode
command to enable or disable Loopback Detection on an interface.
Examples
The following example enables Loopback detection globally.
Console(config)# loopback-detection enable
Related Commands
loopback-detection enable
loopback-detection mode
Table 4-20. Loopback Detection Commands
Loopback Detection Commands
Mode
GC
IC
GC
GC
UE
4
Page
4-451
4-452
4-453
4-453
4-454
451