Ip Arp Inspection - Alcatel OS-LS-6224 User Manual

Default Configuration
This command has no default configuration.
Command Mode
EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the status of IP source guard.
Console# show ip source-guard status
IP Source Guard: Enabled
Interface Filter Status
---------- ------ ------
1/32 IP

ip arp inspection

The ip arp inspection Global Configuration mode command globally enables ARP
inspection. To disable ARP inspection, use the no form of this command.
Syntax
ip arp inspection
no ip arp inspection
Default Configuration
The default configuration is set to disabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example globally enables the ARP inspection.
Console # (config)# ip arp inspection
Console # (config)# 01-Jan-2000 23:07:53 %ARPINSP-I-PCKTLOG: ARP packet
dropped from port g3 with VLAN tag 1 and reason: packet verification failed
SRC MAC 00:00:5e:00:01:07 SRC IP 10.6.22.193 DST MAC 00:00:00:00:00:00 DST
IP 10.6.22.195
DHCP Snooping, IP Source Guard and ARP Inspection Commands
IP address
----------
Active 10.1.8.32
MAC address VLAN
-------------- -----
0060.704C.83FF 3
4
Type
-----
3DHCP
657