power inline priority
The power inline priority Interface Configuration (Ethernet) mode command
configures the inline power management priority of the interface. To return to the
default configuration, use the no form of this command.
Syntax
power inline priority
no power inline priority
Parameters
• critical — Indicates that operating the powered device is critical.
• high — Indicates that operating the powered device has high priority.
• low — Indicates that operating the powered device has low priority.
Default Setting
The default setting is low priority.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the device connected to Ethernet interface 1/e1
as a high-priority powered device.
Console(config)# interface ethernet 1/e1
Console(config-if)# power inline priority high
Related Commands
power inline
power inline powered-device
power inline usage-threshold
show power inline
power inline usage-threshold
The power inline usage-threshold Global Configuration mode command
configures the threshold for initiating inline power usage alarms. To return to the
default configuration, use the no form of this command.
Syntax
power inline usage-threshold percentage
no power inline usage-threshold
Parameters
• percentage — Specifies the threshold as a percentage to compare
critical | high | low
{
Power over Ethernet Commands
}
4
473