Spanning-Tree Port-Priority - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Default Setting
Default path cost is determined by port speed and path cost method (long or
short) as shown below:
Interface
Port-channel
Gigabit Ethernet (1000 Mbps)
Fast Ethernet (100 Mbps)
Ethernet (10 Mbps)
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
The path cost method is configured using the spanning-tree pathcost
method Global Configuration mode command.
Example
The following example configures the spanning-tree cost on Ethernet port 1/e15 to
35000.
Console(config)# interface ethernet 1/e15
Console(config-if)# spanning-tree cost 35000
Related Commands
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree disable

spanning-tree port-priority

spanning-tree portfast
spanning-tree link-type
show spanning-tree
spanning-tree port-priority
The spanning-tree port-priority Interface Configuration mode command
configures port priority. To return to the default configuration, use the no form of this
command.
Syntax
spanning-tree port-priority priority
558
Long
20,000
20,000
200,000
2,000,000
Short
4
4
19
100