3
Configuring the Switch
click Modify to define the fields and click Apply.
Figure 3-138. Loopback Detection Interface Settings Page
Modify Loopback Detection Interface Settings Page
The Modify Loopback Detection Interface Settings Page contains the following
fields:
• Interface — Select the interface for which the Loopback Detection information is
displayed. The possible field values are:
–
Port — Select the port for which the Loopback Detection information is
displayed.
–
LAG — Select the LAG for which the Loopback Detection information is
displayed.
• Loopback Status — Select the Loopback Detection status for the interface. The
possible values are:
–
Enable — Enables LBD on the interface.
–
Disable — Disables LBD on the interface. This is the default value.
256