Related Commands
sntp anycast client enable
sntp unicast client enable
show clock
The show clock User EXEC mode command displays the time and date from the
system clock.
Syntax
show clock [detail]
Parameters
• detail — Shows timezone and summertime configuration.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The symbol that precedes the show clock display indicates the following:
Symbol
*
(blank)
.
Example
The following example displays the time and date from the system clock.
Console> show clock
15:29:03 PDT(UTC-7) Jun 17 2002
Time source is SNTP
Console> show clock detail
15:29:03 PDT(UTC-7) Jun 17 2002
Time source is SNTP
Time zone:
Acronym is PST
Offset is UTC-8
Summertime:
Acronym is PDT
Recurring every year.
Begins at first Sunday of April at 2:00.
Ends at last Sunday of October at 2:00.
Offset is 60 minutes.
Description
Time is not authoritative.
Time is authoritative.
Time is authoritative, but SNTP is not synchronized.
4
Clock Commands
365