Figure 3-71. Port Security Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
• Limited Dynamic Lock — Locks the port by deleting the current dynamic MAC
addresses associated with the port. The port learns up to the maximum
addresses allowed on the port. Both relearning and aging MAC addresses are
enabled.
• Max Entries — Specifies the number of MAC address that can be learned on the
port. The Max Entries field is enabled only if Locked is selected in the Set Port field.
In addition, the Limited Dynamic Lock mode is selected. The default is 1.
• Action — Defines the action to be applied to packets arriving on a locked port. The
possible field values are:
• Forward — Forwards packets from an unknown source without learning the
MAC address.
• Discard — Discards packets from any unlearned source. This is the default
value.
• Shutdown — Discards packets from any unlearned source and shuts down the
port. The port remains shut down until reactivated, or until the device is reset.
• Trap — Enables traps when a packet is received on a locked port. The possible
field values are:
• Checked (True)— Enables traps.
• Unchecked (False) — Disables traps.
• Trap Frequency (Sec) — Defines the amount of time (in seconds) between traps.
The default value is 10 seconds.
Web – Click Security, Traffic Control, Port Security. Define the fields and click Apply.
150

Figure 3-71. Port Security Page