4
Command Line Interface
ip arp inspection list create
The ip arp inspection list create Global Configuration mode command creates a
static ARP binding list and to enter the ARP list configuration mode. To delete the
list, use the no form of this command.
Syntax
ip arp inspection list create name
no ip arp inspection list create name
Parameters
• name — Specifies the list name. (Range: 1-32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
Command Usage
This command enables static ARP inspection on a VLAN.
Example
The following example creates the static ARP binding list arplist.
Console # (config)# ip arp inspection list create arplist
Console # (config-arp-list)#
ip mac
The ip mac ARP-list Configuration mode command displays static ARP binding. To
delete a binding, use the no form of this command.
Syntax
ip ip-address mac mac-address
no ip ip-address mac mac-address
Parameters
• ip-address — Specifies the IP address to be entered to the list.
• mac-address — Specifies the MAC address associated with the IP address.
Default Configuration
No binding is defined.
Command Mode
ARP-list Configuration mode
Command Usage
There are no user guidelines for this command.
660