4
Command Line Interface
Command Usage
There are no user guidelines for this command.
Example
The following example forces port 1/e1 to join port-channel 1 without an LACP
operation.
Console(config)# interface ethernet 1/e1
Console(config-if)# channel-group 1 mode on
Related Commands
show interfaces port-channel
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays
port-channel information.
Syntax
show interfaces port-channel [port-channel-number]
Parameters
• port-channel-number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
Console# show interfaces port-channel
Channel
-------
1
2
3
Related Commands
channel-group
468
Ports
---------------------------------
Active: 1/e1, 2/e2
Active: 2/e2, 2/e7 Inactive: 3/e1
Active: 3/e3, 3/e8