Parameters
• hop-count — Number of hops in an MST region before the BPDU is
discarded. (Range: 1-40)
Default Setting
The default number of hops is 20.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the maximum number of hops that a packet
travels in an MST region before it is discarded to 10.
Console (config) # spanning-tree mst max-hops 10
Related Commands
spanning-tree mst priority
spanning-tree mst port-priority
spanning-tree mst cost
spanning-tree mst configuration
instance (mst)
name (mst)
revision (mst)
show (mst)
exit (mst)
abort (mst)
show spanning-tree
spanning-tree mst port-priority
The spanning-tree mst port-priority Interface Configuration mode command
configures port priority for the specified MST instance. To return to the default
configuration, use the no form of this command.
Syntax
spanning-tree mst instance-id port-priority priority
no spanning-tree mst instance-id port-priority
Parameters
• instance-ID — ID of the spanning tree instance.
Spanning-Tree Commands
4
565