Speed - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Example
The following example adds a description to Ethernet port 1/e5.
Console(config)# interface ethernet 1/e5
Console(config-if)# description "RD SW#3"
Related Commands
show interfaces description

speed

The speed Interface Configuration (Ethernet, port-channel) mode command
configures the speed of a given Ethernet interface when not using auto-negotiation.
To restore the default configuration, use the no form of this command.
Syntax
speed {10 | 100 | 1000}
no speed
Parameters
• 10 — Forces10 Mbps operation.
• 100 — Forces 100 Mbps operation.
• 1000 — Forces 1000 Mbps operation.
Default Setting
Maximum port capability
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
The no speed command in a port-channel context returns each port in the
port-channel to its maximum capability.
Example
The following example configures the speed operation of Ethernet port 1/e5 to 100
Mbps operation.
Console(config)# interface ethernet 1/e5
Console(config-if)# speed 100
Related Commands
shutdown
duplex
negotiation
flowcontrol
mdix
384