Show System - Alcatel OS-LS-6224 User Manual

Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example lists open Telnet sessions.
Console> show sessions
Connection
----------
1
2
The following table describes significant fields shown above.
Field Description
Connection Connection number.
Host Remote host to which the device is connected through a Telnet session.
Address IP address of the remote host.
Port Telnet TCP port number
Byte Number of unread bytes for the user to see on the connection.
Related Commands

show system

show system
The show system User EXEC mode command displays system information.
Syntax
show system [unit unit]
Parameters
• unit — Specifies the number of the unit. (Range: 1-6)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Host
-------------
Remote device
172.16.1.2
System Management Commands
Address Port
---------- -----
172.16.1.1 23
172.16.1.2 23
4
Byte
----
89
8
629