Show Stack - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
no stack display-order
Parameters
• top unit — Specifies the number of the unit displayed at the top.
(Range: 1-8)
• bottom unit — Specifies the number of the unit displayed at the bottom.
(Range: 1-8)
Default Setting
The master unit is displayed at the top.
Command Modes
Global Configuration mode
Command Usage
If the units are not adjacent in ring or chain topology, the units are not at the
edge and the default display order is used.
Example
This example displays unit 8 at the top of the display and unit 1 at the bottom.
Console# config
Console(config)# stack display-order top 8 bottom 1
Related Commands
stack master
stack reload

show stack

show stack
The show stack User EXEC mode command displays information about the status
of a stack.
Syntax
show stack [unit unit]
Parameters
• unit — Specifies the number of the unit. (Range: 1-8)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
626