Alcatel OS-LS-6224 User Manual page 131

rule number is essential to matching packets to rules, as packets are matched on
a first-fit basis.
• Interface — Indicates the interface type to which the rule applies. The possible
field values are:
• Port — Attaches the rule to the selected port.
• LAG — Attaches the rule to the selected LAG.
• VLAN — Attaches the rule to the selected VLAN.
• Management Method — Defines the management method for which the rule is
defined. Users with this access profile can access the device using the
management method selected. The possible field values are:
• All — Assigns all management methods to the rule.
• Telnet — Assigns Telnet access to the rule. If selected, users accessing the
device using Telnet meeting access profile criteria are permitted or denied
access to the device.
• Secure Telnet (SSH) — Assigns SSH access to the rule. If selected, users
accessing the device using Telnet meeting access profile criteria are permitted
or denied access to the device.
• HTTP — Assigns HTTP access to the rule. If selected, users accessing the
device using HTTP meeting access profile criteria are permitted or denied
access to the device.
• Secure HTTP (HTTPS) — Assigns HTTPS access to the rule. If selected, users
accessing the device using HTTPS meeting access profile criteria are permitted
or denied access to the device.
• SNMP — Assigns SNMP access to the rule. If selected, users accessing the
device using SNMP meeting access profile criteria are permitted or denied
access to the device.
• Source IP Address — Defines the interface source IP address to which the rule
applies.
• Prefix Length — Defines the number of bits that comprise the source IP address
prefix, or the network mask of the source IP address.
• Action —Defines the action attached to the rule. The possible field values are:
• Permit — Permits access to the device.
• Deny — Denies access to the device. This is the default.
• Remove — Removes rules from the selected access profiles. The possible field
values are:
• Checked — Removes the selected rule from the access profile.
• Unchecked — Maintains the rules attached to the access profile.
Web – Click System, WebViewMgmt, Authentication, Profiles Rules, define the
fields, and click Apply.
Configuring Authentication Methods
3
107