Telnet - Alcatel OS-LS-6224 User Manual

The following table describes characters that may appear in the traceroute
command output.
Field
*
?
A
F
H
N
P
Q
R
S
U
Related Commands
resume

telnet

The telnet User EXEC mode command enables logging on to a host that supports
Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1......]
Parameters
• ip-address — IP address of the destination host.
• hostname — Host name of the destination host. (Range: 1-158 characters)
• port — A decimal TCP port number, or one of the keywords listed in the
Ports table in the Command Usage.
• keyword — One or more keywords listed in the Keywords table in the
Command Usage.
Default Setting
The default port is the Telnet port (decimal23) on the host.
Command Mode
User EXEC mode
System Management Commands
Description
The probe timed out.
Unknown packet type.
Administratively unreachable. Usually, this output indicates that
an access list is blocking traffic.
Fragmentation is required and DF is set.
Host unreachable.
Network unreachable.
Protocol unreachable.
Source quench.
Fragment reassembly time exceeded.
Source route failed.
Port unreachable.
4
619