show ip source-guard configuration
The show ip source-guard configuration EXEC mode command displays the IP
source guard configuration.
Syntax
show ip source-guard configuration [mac-address mac-address]
[ip-address ip-address] [vlan vlan] [ethernet interface | port-channel
port-channel-number]
Parameters
• mac-address — Specifies a MAC address.
• ip-address — Specifies an IP address.
• vlan-id — Specifies a VLAN number.
• interface — Specifies an Ethernet port.
• port-channel-number — Specifies a port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the IP source guard configuration.
Console# show ip source-guard configuration
IP Source Guard is Enabled.
Interface
State
----------- ---------
1/21
Enabled
1/22
Enabled
1/22
Enabled
1/22
Enabled
1/23
Enabled
1/24
Enabled
1/32
Disabled
show ip source-guard inactive
The show ip source-guard inactive EXEC mode command displays the IP source
guard inactive addresses.
DHCP Snooping, IP Source Guard and ARP Inspection Commands
4
655