Loopback detection:
Mode:
LBD packets interval:
Interface
---------
1/1
1/2
1/3
1/4
1/5
The following table describes the fields shown in the display:
Field
Interface
Loopback Detection
Admin
Loopback Detection
Oper
Related Commands
loopback-detection enable
loopback-detection enable
loopback-detection mode
loopback-detection interval
Enabled
10 Seconds
Loopback Detection
Admin
-----
Enabled
Enabled
Enabled
Disabled
Disabled
Description
Interface number
Specifies the user's configuration of the Loopback Detection
feature on the interface. The possible values are Enabled or
Disabled.
Specifies the active Loopback Detection status on the interface
(whether or not Loopback Detection packets are sent). The
possible values are Enabled or Disabled. For possible reasons
why Loopback Detection is not active, see the usage guidelines
of the loopback-detection enable Interface Configuration
command.
Loopback Detection Commands
Oper
----
Enabled
Enabled
Enabled
Disabled
Disabled
4
455