Radius-Server Retransmit; Radius-Server Source-Ip - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

radius-server retransmit

The radius-server retransmit Global Configuration mode command specifies the
number of times the software searches the list of RADIUS server hosts. To reset the
default configuration, use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Parameters
• retries — Specifies the retransmit value. (Range: 1 - 10)
Default Setting
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list
of RADIUS server hosts to 5 times.
Console(config)# radius-server retransmit 5
Related Commands
radius-server host
radius-server key

radius-server source-ip

radius-server timeout
radius-server deadtime
show radius-servers
radius-server source-ip
The radius-server source-ip Global Configuration mode command specifies the
source IP address used for communication with RADIUS servers. To return to the
default configuration, use the no form of this command.
Syntax
radius-server source-ip source
no radius-source-ip source
510