Mapping Cos Values To Queues; Figure 3-124. Vlan Rate Limit Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch

Mapping CoS Values to Queues

The CoS to Queue Page contains fields for classifying CoS settings to traffic
queues.
Command Attributes
• Class of Service — Specifies the VLAN (CoS) priority tag values, where zero is
the lowest and 8 is the highest.
• Queue — Defines the traffic forwarding queue to which the CoS priority is mapped.
In a standalone device, four traffic priority queues are supported, where Queue 4
has the highest priority and Queue 1 has the lowest priority. In stacked units, three
priority queues are supported.
Web – Click Policy, General QoS, Queue Mapping, Cos to Queue. Define the fields,
and click Apply.
240

Figure 3-124. VLAN Rate Limit Page