Viewing Gvrp Statistics; Figure 3-113. Gvrp Parameters Page - Alcatel OS-LS-6224 User Manual

Apply.
CLI – The following is an example of the GVRP configuration commands:
Console(config)# gvrp enable
Console(config)# interface ethernet 1/e6
Console(config-if)# gvrp enable
Console(config-if)# gvrp vlan-creation-forbid
Console(config-if)# gvrp registration-forbid

Viewing GVRP Statistics

The GVRP Statistics Page contains device statistics for GVRP.
Command Attributes
• Interface—Specifies the interface type for which the statistics are displayed.
• Port—Indicates port statistics are displayed.
• LAG—Indicates LAG statistics are displayed.
• Refresh Rate—Indicates the amount of time that passes before the GVRP
statistics are refreshed. The possible field values are:
• 15 Sec—Indicates that the GVRP statistics are refreshed every 15 seconds.
• 30 Sec—Indicates that the GVRP statistics are refreshed every 30 seconds.
• 60 Sec—Indicates that the GVRP statistics are refreshed every 60 seconds.
• No Refresh—Indicates that the GVRP statistics are not refreshed.
• Join Empty—Displays the device GVRP Join Empty statistics.
• Empty—Displays the device GVRP Empty statistics.
• Leave Empty—Displays the device GVRP Leave Empty statistics.

Figure 3-113. GVRP Parameters Page

Defining VLAN Groups
4-406
4-380
4-406
4-409
4-409
3
219