Switchport Access Multicast-Tv Vlan - Alcatel OS-LS-6224 User Manual

Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan
switchport trunk native vlan
switchport general allowed vlan
switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
switchport forbidden vlan

switchport access multicast-tv vlan

switchport access multicast-tv vlan
Use the switchport access multicast-tv vlan Interface Configuration mode
command to enable receiving multicast transmissions from a VLAN that is not the
Access port VLAN, while keeping the L2 segregation with subscribers on different
Access port VLANs. Use the no form of this command to disable receiving multicast
transmissions.
Syntax
switchport access multicast-tv vlan vlan-id
no switchport access multicast-tv vlan
Parameters
vlan-id — VLAN ID of the Multicast TV VLAN.
•
Default Configuration
Disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
The user can receive multicast transmit transmissions on the multicast TV
VLAN, but cannot transmit
All IGMP reports are associated with the multicast TV VLAN.
Example
The following example configures Multicast TV VLAN 20 on Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport access multicast-tv vlan 20
4
VLAN Commands
699