Dot1X Max-Req - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
resending the request. To return to the default configuration, use the no form of this
command.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
Parameters
• seconds — Specifies the time in seconds that the device waits for a
response to an EAP-request/identity frame from the client before resending
the request. (Range: 1-65535 seconds)
Default Configuration
Timeout period is 30 seconds.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
The default value of this command should be changed only to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients. and authentication servers
Example
The following command sets the number of seconds that the device waits for a
response to an EAP-request/identity frame, to 3600 seconds.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x timeout tx-period 3600
Related Commands
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x timeout quiet-period

dot1x max-req

dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users
dot1x max-req
The dot1x max-req Interface Configuration mode command sets the maximum
number of times that the device sends an Extensible Authentication Protocol
276