Command Attributes
•
Unit No. — Indicates the stacking member for which the interface configuration
information is displayed.
—
•
Port
Displays the port to which the network policy is attached.
•
LLDP MED Status — Indicates if LLDP is enabled on the device. The possible
field values are:
–
Enable – Enables LLDP MED on the device.
–
Disable – Disables LLDP MED on the device. This is the default value
•
Network Policy — Indicates whether activated or not.
•
Location — Indicates whether activated or not.
—
•
PoE
Indicates whether activated or not.
Web – Click Network Discovery, LLDP, MED Port Settings. Define the fields and
click Apply.
Viewing the LLDP Neighbor Information
The LLDP Neighbor Information Page contains information received from
neighboring device LLDP advertisements.
Command Attributes
• Port — Displays the neighboring port number.
• Device ID — Displays the neighboring device ID.
• System Name — Displays the neighboring system time.
• Port ID — Displays the neighboring port ID.
• Capabilities — Displays the neighboring device capabilities.
• Remove — Removes the Neighbors Information entry.
Web – Click Network Discovery, LLDP, Neighbors Information. Define the fields and
Figure 3-61. MED Port Settings Page
3
Configuring LLDP
133