Spanning-Tree Mst Max-Hops - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Parameters
• instance-id — ID of the spanning -tree instance.
(Range: 1-Product Specific upper limit)
• priority — Device priority for the specified spanning-tree instance.
(Range: 0-61440 in multiples of 4096)
Default Setting
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Mode
Global Configuration mode
Command Usage
The device with the lowest priority is selected as the root of the spanning tree.
Example
The following example configures the spanning tree priority of instance 1 to 4096.
Console (config) # spanning-tree mst 1 priority 4096
Related Commands

spanning-tree mst max-hops

spanning-tree mst port-priority
spanning-tree mst cost
spanning-tree mst configuration
instance (mst)
name (mst)
revision (mst)
show (mst)
exit (mst)
abort (mst)
show spanning-tree
spanning-tree mst max-hops
The spanning-tree mst priority Global Configuration mode command configures
the number of hops in an MST region before the BPDU is discarded and the port
information is aged out. To return to the default configuration, use the no form of this
command.
Syntax
spanning-tree mst max-hops hop-count
no spanning-tree mst max-hops
564