Startup Menu Functions - Alcatel OS-LS-6224 User Manual

Initial Configuration
2
3. Enter the command "show version" to verify which boot version is currently
running on the device. The following is an example of the information that
appears:
Console# show version
SW version x.xx.xx (date xx-xxx-2004 time 13:42:41)Boot version
x.xx.xx (date xx-xx-2004 time 15:12:20)HW version xx.xx.xx (date
xx-xxx-2004 time 12:12:20)
4. Enter the command "copy tftp://{tftp address}/{file name} boot" to copy the boot
image to the switch. The following is an example of the information that
appears:
Console# copy tftp://176.215.31.3/6024_boot-10013.rfb
boot
Erasing file
...done.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!Copy:393232 bytes copied in 00:00:05 [hh:mm:ss]
5. Enter the command "reload". The following message is displayed:
Console# reload
This command will reset the whole system and disconnect your
current session. Do you want to continue (y/n)[n]?
6. Enter "Y" to reboot the switch.

Startup Menu Functions

Additional configuration functions can be performed from the Startup menu.
To display the Startup menu:
1. During the boot process, after the first part of the POST is completed press
<Esc> or <Enter> within two seconds after the following message is displayed:
Autoboot in 2 seconds -press RETURN or Esc.to abort and enter prom.
The Startup menu is displayed and contains the following configuration
functions:
[1]Download Software
[2]Erase Flash File
[3]Erase Flash Sectors
[4]Password Recovery Procedure
[5]Enter Diagnostic Mode
[6]Back Enter your choice or press 'ESC' to exit:
28
4-630
4-369
4-623