Syntax
show bridge address-table count [vlan vlan] [ethernet interface-number |
port-channel port-channel-number]
Parameters
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
In this example, the number of addresses present in all VLANs are displayed.
Console# show bridge address-table count
This may take some time.
Capacity
: 8192
Free
: 8083
Used
: 109
Secure
: 2
Dynamic
: 97
Static
: 1
Internal
: 9
Related Commands
bridge address
show bridge multicast address-table
The show bridge multicast address-table User EXEC mode command displays
multicast MAC address or IP address table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address
mac-multicast-address | ip-multicast-address] [format ip | format mac]
[source ip address]
Parameters
• vlan-id — A valid VLAN ID value.
Address Table Commands
4
331