Trust Cos-Dscp - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Parameters
• policy-map-name — Specifies the name of the policy map to be displayed.
• class-name — Specifies the name of the class whose QoS policies are to
be displayed.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays all policy maps.
Console> show policy-map
Policy Map policy1
class class1
set Ip dscp 7
Policy Map policy2
class class 2
police 96000 4800 exceed-action drop
class class3
police 124000 96000 exceed-action policed-dscp-transmit
Related Commands
policy-map
service-policy

trust cos-dscp

The trust cos-dscp Policy-map Class Configuration mode command configures the
trust state. The trust state determines the source of the internal DSCP value used by
Quality of Service (QoS). To return to the default configuration, use the no form of
this command.
Syntax
trust cos-dscp
no trust cos-dscp
Default Setting
The port is not in the trust mode.
If the port is in trust mode, the internal DSCP value is derived from the ingress
packet.
Command Mode
Policy-map Class Configuration mode
486