Ssh Commands - Alcatel OS-LS-6224 User Manual

SSH Commands

Command Function
ip ssh port Specifies the port to be used by the SSH server. To return to the
default configuration, use the no form of this command.
ip ssh server Enables the device to be configured from a SSH server. To disable
this function, use the no form of this command.
crypto key generate Generates DSA key pairs.
dsa
crypto key generate Generates RSA key pairs.
rsa
ip ssh pubkey-auth Enables public key authentication for incoming SSH sessions. To
disable this function, use the no form of this command.
crypto key Enters the SSH Public Key-chain Configuration mode. The mode
pubkey-chain ssh is used to manually specify other device public keys such as SSH
client public keys.
user-key Specifies which SSH public key is manually configured. To
remove an SSH public key, use the no form of this command.
key-string Manually specifies an SSH public key.
show ip ssh Displays the SSH server configuration.
show crypto key Displays the SSH public keys on the device.
mypubkey
show crypto key Displays SSH public keys stored on the device.
pubkey-chain ssh
ip ssh port
The ip ssh port Global Configuration mode command specifies the port to be used
by the SSH server. To return to the default configuration, use the no form of this
command.
Syntax
ip ssh port port-number
no ip ssh port
Parameters
• port-number — Port number for use by the SSH server (Range: 1 - 65535).
Default Setting
The default port number is 22.
Command Mode
Global Configuration mode
Table 4-31. SSH Commands
4
SSH Commands
Mode Page
GC 4-591
GC 4-592
GC 4-592
GC 4-593
GC 4-594
GC 4-595
SPK 4-596
SPK 4-597
PE 4-598
PE 4-599
PE 4-600
591