Alcatel OS-LS-6224 User Manual page 395

4
Configuration and Image File Commands
To copy an image file from a server to flash memory, use the copy source-url
image command.
Copying a Boot File from a Server to Flash Memory
To copy a boot file from a server to flash memory, enter the copy source-url
boot command.
Copying a Configuration File from a Server to the Running Configuration
File
To load a configuration file from a network server to the running configuration
file of the device, enter the copy source-url running-config command. The
commands in the loaded configuration file are added to those in the running
configuration file as if the commands were typed in the command-line
interface (CLI). Thus, the resulting configuration file is a combination of the
previous running configuration and the loaded configuration files with the
loaded configuration file taking precedence.
Copying a Configuration File from a Server to the Startup Configuration
To copy a configuration file from a network server to the startup configuration
file of the device, enter copy source-url startup-config. The startup
configuration file is replaced by the copied configuration file.
Storing the Running or Startup Configuration on a Server
Use the copy running-config destination-url command to copy the current
configuration file to a network server using TFTP. Use the copy
startup-config destination-url command to copy the startup configuration file
to a network server.
Saving the Running Configuration to the Startup Configuration
To copy the running configuration to the startup configuration file, enter the
copy running-config startup-config command.
Backing up the Running or Startup Configuration to a Backup
Configuration File
To copy the running configuration file to a backup configuration file, enter the
copy running-config command. To copy the startup configuration file to a
backup configuration file, enter the copy startup-config command.
Before copying from the backup configuration file to the running configuration
file, make sure that the backup configuration file has not been corrupted.
371