Login Authentication - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Command Usage
The default and optional list names created with the aaa authentication
enable command are used with the enable authentication command.
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even
if all methods return an error, specify none as the final method in the
command line.
All aaa authentication enable default requests sent by the device to a
RADIUS or TACACS+ server include the username $enabx$., where x is the
requested privilege level.
Example
The following example sets the enable password for authentication when accessing
higher privilege levels.
Console(config)# aaa authentication enable default enable
Related Commands
aaa authentication dot1x
aaa authentication login

login authentication

show authentication methods
login authentication
The login authentication Line Configuration mode command specifies the login
authentication method list for a remote telnet or console. To return to the default
configuration specified by the aaa authentication login command, use the no form
of this command.
Syntax
login authentication {default | list-name}
no login authentication
Parameters
• default — Uses the default list created with the aaa authentication login
command.
• list-name — Uses the indicated list created with the aaa authentication
login command.
Default Setting
Uses the default set with the aaa authentication login command.
Command Mode
Line Configuration mode
296