Advanced Features; Dot1X Auth-Not-Req; Dot1X Multiple-Hosts - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout

ADVANCED FEATURES

dot1x auth-not-req

The dot1x auth-not-req Interface Configuration mode command enables
unauthorized devices access to the VLAN. To disable access to the VLAN, use the
no form of this command.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Default Configuration
Access is enabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
An access port cannot be a member in an unauthenticated VLAN.
The native VLAN of a trunk port cannot be an unauthenticated VLAN.
For a general port, the PVID can be an unauthenticated VLAN (although only
tagged packets would be accepted in the unauthorized state.)
Example
The following example enables access to the VLAN to unauthorized devices.
Console(config-if)# dot1x auth-not-req
Related Commands
show dot1x advanced

dot1x multiple-hosts

The dot1x multiple-hosts Interface Configuration mode command enables multiple
hosts (clients) on an 802.1X-authorized port, where the authorization state of the
port is set to auto. To return to the default configuration, use the no form of this
command.
Syntax
dot1x multiple-hosts [authentication]
no dot1x multiple-hosts
286